Dairy Water Chiller

Dairy Water Chiller

Compact chiller cooling capacity: 10kW-82kW

Characteristics:

1. Pre-cooling

Selecting the right pre-cooling system for your farm is an important decision. There are many factors to take into consideration before deciding what type of system will suit your farm best. Cow numbers, bail number, water temperature, milk pump flow rates, power availability and primary cooling design are just some of the things that need to be considered before a solution can be proposed.

2. Chilled water system

Chilled water system chills a large volume of water to 4˚C-10˚C outside of milking time. It circulates the water during milking through the second stage of your plate cooler reducing milk temperature to 6˚C-10˚C before entering the milk vat. This dairy Water Chiller is smaller than a glycol unit but needs to run over a longer period of time each day. Chilled water system are the most common pre-cooling option.

3. Glycol system

Glycol pre-cooling system chills approved food grade glycol/water mix to around 2℃ in a 1,000L tank. The glycol water chiller continually chills glycol during milking and stores it in the storage tank this glycol then gets circulated through the second stage of your plate cooler snap chilling your milk so it enters the vat between 4℃-7℃

4. Chilled water system

• Ability to snap chill milk to 6℃-10℃ within 3 minutes of leaving the cow.

• Built in heat recovery producing hot water up to 60℃ at 3 liters per minute.

• Independent from your vat refrigeration system giving you peace of mind.

• It can use off peak power outside milking time to chill the water.